Bubble Pop—Oil-in-Water BB Gel Mousse with Sunscreen

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Neo Heliopan AV (Symrise) (Ethylhexyl methoxycinnamate)
5.00

Univul A Plus Granular (BASF) (Diethylamino hydroxybenzoyl hexyl benzoate)
2.00

Neo Heliopan 357 (Symrise) (Butyl methoxydibenzoylmethane)
5.00

Montanox L (Seppic S.A.) (C14-22 alcohols (and) C12-20 alkyl glucoside)
3.00

Arlacel 165 (Croda) (Glyceryl stearate (and) PEG-100 stearate)
0.50

Lanette O (BASF Care Chemicals/Cognis Corp) (Cetearyl alcohol)
1.00

Crodamol GTCC (Croda) (Caprylic/capric triglyceride)
5.00

Crodamol AB (Croda) (C12-15 Alkyl benzoate)
5.00

Dow Corning 556 Fluid (Phenyl trimethicone)
3.00

Dow Corning SW-8005 C30 Resin Wax (C30-45 alkyldimethylsilyl polypropylsilsesquioxane)
2.00

Phase B

Water
q.s.

Keltrol CG-SFT (CP Kelco) (Xanthan gum)
0.05

Glycerin
10.00

Dissolvine NA2-P (Akzo Nobel Chemicals) (Disodium EDTA)
0.10

Phase C

Suncroma C47-060 (Sun Chemical Corp) (Titanium dioxide)
9.50

Suncroma C33-8073 (Sun Chemical Corp) (Iron oxides)
1.20

Suncroma C33-5000 (Sun Chemical Corp) (Black iron oxide)
0.05

Suncroma C33-128 (Sun Chemical Corp) (Iron oxide)
0.40

Phase D

Parfum
0.20

Dow Corning PF-9510 Elastomer Suspension (Dimethicone/vinyl dimethicone crosspolymer (and) C12-14 pareth-12)
3.00

Euxyl PE 9010 (Schülke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)
0.50

Procedure

Combine phase A ingredients in order with mixing (~400 rpm) and heating to 75°C. Combine phase B ingredients in order with mixing (~400 rpm) and heating to 75°C. Remove from heat and add phase B to phase A while mixing at 700 rpm. Grind pigments from phase C until homogeneous. Add phase C to AB while mixing. When temperature is below 40°C, add ingredients of phase D. Mix at 2,000 rpm for 5 to 10 minutes. Pass through high sheer homogenizer for 30 seconds.